|
上海Z 408斯米克焊条
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖
|
ENiFe-Cl
|
|
上海Z 508斯米克焊条
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊
|
ENiCu-B
|
|
上海Cu 107斯米克焊条
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排
|
ECu
|
|
上海Cu 207斯米克焊条
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用
|
ECuSi
|
|
上海Cu 227斯米克焊条
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用
|
ECuSn-C
|
|
上海Cu 237斯米克焊条
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用
|
ECuAl-A2
|
|
上海Al 109斯米克焊条
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
纯铝，耐蚀性好，但强度不高，纯铝焊接用
|
E1100
|
|
上海Al 209斯米克焊条
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金
|
E4043
|
|
上海Al 309斯米克焊条
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
铝锰，强度高，耐蚀。铝合金焊接用
|
E3003
|
|
上海Ni 102斯米克焊条
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel.
纯镍，用于镍、镍与钢的焊接与堆焊
|
ENi-1
|
|
上海Ni 207斯米克焊条
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
镍铜，用于镍铜、镍铜与钢的焊接与堆焊
|
|